Why engineers ring the office, and how to stop it

The six reasons engineers ring the office, how to head off each one with notes and simple rules, and what BigChange, Joblogic and Simpro already give them.

Centrus AI · · 8 min read

An electrician in navy overalls checks his phone beside an open consumer unit in a house hallway, his toolbag on the floor by the door.
On this page
  1. Why do engineers keep calling the office?
  2. How do you stop engineers ringing the office all day?
  3. How do you answer the questions that come up on site?
  4. What do BigChange, Joblogic and Simpro already give engineers?
  5. Which way of cutting the calls suits your business?
  6. How does Centrus help?
  7. What has PFL Electrical seen?
  8. Frequently asked questions

Engineers ring the office because they need answers from somewhere they cannot access while on a job, for example: the job system, a manual, a spreadsheet or a colleague's memory. To save engineers time by ringing the office throughout the day, put each answer where the engineer already has access.

Each call is short. The cost is the office stopping what it was doing, and the engineer standing still until someone picks up. This post covers six common calls, how to head off each one, what BigChange, Joblogic and Simpro give engineers today, and which calls should stay calls.

Why do engineers keep calling the office?

Because they work independently, and the office is the easiest way to reach answers. The Health and Safety Executive names engineers among lone workers and says "there will always be greater risks for lone workers without direct supervision or anyone to help them if things go wrong" (HSE, protecting lone workers (opens in a new tab), as of 30/10/2026). On a technical question, the phone is the colleague who is not standing beside them.

The answers usually exist somewhere, spread across different places. The job is in the job system, the manual in a shared folder, the parking tip in a workbook or one engineer's head. Ringing the office is how an engineer reaches all of them at once.

Signal plays a part too. Ofcom's Connected Nations UK report 2025 (opens in a new tab), says indoor coverage "can vary depending on factors such as wall thickness, building materials used in construction and where in a building people are using their phone", and finds that each network reaches between 78% and 84% of rural premises with indoor 4G. An engineer in a basement plant room may have to walk outside before a call or a message goes through.

As a worked example, 10 engineers who each ring the office 3 times a day, at 5 minutes of office time a call, cost 150 minutes every working day. That is 12.5 hours a week, before the engineers' own wait.

What a second visit costs is covered in first-time fix rates, and the case for answers on demand in just-in-time intelligence.

How do you stop engineers ringing the office all day?

Find out why they ring, then put each answer where they already look. Count the calls for a week and fix the biggest reason first. Put a sheet by the office phone and tick each call against one of six reasons, plus "other". A week is enough to show which call costs the most time, and it gives you a figure to compare against later.

Three of the six can be answered before the van leaves.

The brief for tomorrow. Send each engineer their jobs the evening before, in route order, with the notes from the last visit to any site they have not been to. Whether the planner sends it by hand or the job system does, it should arrive before anyone has to ask.

Access and parking. Keep one record per site: where the key is, the keysafe code, who to ask on arrival, where to park, permits and induction. A shared spreadsheet works. What keeps it useful: the engineer who finds a note wrong corrects it that day, and the office reads it before the next booking.

The next job's contact. Every job should carry a site contact name and number, checked when it is booked. Then a late engineer rings the customer to say so, not the office to find out who to ring.

How do you answer the questions that come up on site?

Give engineers the documents and the rules, and name a person for the rest.

Technical questions. Keep manufacturer manuals, service bulletins and your own fix notes in one shared folder, named by make and model, that opens on a phone. Ask engineers to send the make, model and fault code in the first message. For anything the manual does not cover, name the senior engineer on call each day, so the question goes straight to them.

Parts. Show on the job whether the part is on the van, on order or waiting at the merchant. Agree a purchase order limit under which an engineer can order without ringing, and tell them when the part arrives. Most "has it come in yet?" calls stop once the answer is on the job.

Sign-off and extra work. Write down what an engineer can agree on site: extra work up to a set value, when the customer must sign, and how a warranty visit is handled. Put the install date and warranty terms on the job, so the engineer knows whether a visit is chargeable before talking to the customer.

Some calls should stay calls. Safety, a decision that needs judgement and an unhappy customer belong with a person. So does waiving a charge. The aim is to clear the routine questions so the office has time for these.

What do BigChange, Joblogic and Simpro already give engineers?

Each system's own app covers much of what is on the job record. The calls that remain are mostly about information held somewhere else, or never entered.

BigChange

The BigChange app shows the job's address, contact name and phone numbers if one has been added, the job history for that customer, a file library and the stock on the van, according to the BigChange App User Guide (opens in a new tab), (as of 30/10/2026). Calls still come for a fault code that needs a manual held outside BigChange, or a parking tip nobody entered. See the BigChange integration.

Joblogic

Joblogic's engineer app sends each job with the customer address, contact information, site assets, appointment times, access instructions and attachments, and gives access to the complete history of the site, according to its mobile engineer app page (opens in a new tab), (as of 30/10/2026). Calls still come when the access instructions were never filled in, or the answer is in a manual rather than on the job. See the Joblogic integration.

Simpro

Simpro Mobile gives field staff "assigned jobs, site history, customer details, job notes and other information needed to complete a job", according to its mobile app page (opens in a new tab), (as of 30/10/2026). Calls still come for technical questions beyond the asset record, and for whether extra work is authorised. See the Simpro integration.

Which way of cutting the calls suits your business?

Usually more than one of these five, starting with the cheapest.

  1. Better notes, still by phone: The cheapest start. The office still answers, but faster, because the notes exist. It suits a small team with one person on the phone.
  2. A shared spreadsheet and folder: Included with Microsoft 365 or Google Workspace. It works when engineers know where to look, though a large workbook is awkward to search on a phone in a plant room.
  3. The job system's own app: The best place for anything on the job: address, contact, history, stock. It is only as good as what the office enters, and documents kept elsewhere stay elsewhere.
  4. A WhatsApp group: Engineers already use it and replies are quick. Someone still has to answer, and an answer given in a busy group is hard to find a month later.
  5. **An AI assistant on the job system and files:**It answers by message at any hour from the records you already keep. It can only answer from notes and manuals that exist, so the site notes come first.

How does Centrus help?

Engineers message Centrus on WhatsApp, and the answer comes from the live job in BigChange, Joblogic or Simpro and from your other integrations such as Sharepoint, or your uploaded files. Nobody needs to download a new app/software, and the job system stays the record.

For example, if an engineer sends the make, model and fault code via our chat function, Centrus will send back the checks in order from the manufacturer manual, then will look for the part on the van (see technical support on site).

If the night before, an engineer asks what is on tomorrow, Centrus will provide their jobs in route order, with the parking, the keysafe and the last three visits (see prepare engineers before site).

You can update an access correction quickly via voice note, which updates the data and will be given to the next engineer who asks (see save an access tip).

You can learn more about our WhatsApp Integration here.

What has PFL Electrical seen?

PFL Electrical works in BigChange, and its engineers use WhatsApp when using Centrus. The case study records about 100 messages a day and 83 hours a week back, and says engineers "check their schedules, review previous site visits, pull access notes, and read relevant documentation before they leave for site, all via WhatsApp, without calling the office." James Higginson, Operations Director: "We average 100 messages per day. That's roughly 16.5 hours per day saved in operatives waiting for responses."

Read the full PFL Electrical case study.

The six calls and how each is answered are on engineers on site, and everything an engineer can ask is on use cases for field engineers. To see your engineers' own questions answered from a setup like yours, book a demo with us.

Frequently asked questions

How many calls from engineers to the office is normal?

Published figures are hard to compare, so the useful figure is your own. Tally every call for one working week against the reason for it. What matters is the split: if half the calls are about access or parking, fixing the site notes will do more than any new tool.

What should be on the job before the engineer arrives?

The site contact's name and number, access and keysafe details, parking and permit notes, and the notes from the last visit. Add the make and model of the equipment, whether the parts are on the van or on order, and whether the visit is chargeable. Those cover most of the calls engineers make.

Should engineers have access to the office's systems?

They should see what they need for the job, and no more. The job system's app and a shared folder of manuals and site notes cover most of it. Rates, personnel files and customer finances can stay with the office. Check what your job system's app lets you limit for each person before you widen it.

Do engineers need another app to ask Centrus?

  1. They message Centrus on WhatsApp, which is already on their phone, by typing or by voice note. They use the same login and the same permissions as the web app, so an engineer asking from the van sees only what they could see at a desk. There is nothing for the company to install.

Can engineers see everything in Centrus?

  1. Tags decide who can see what, so the office chooses which files an engineer's questions are answered from, and the rest stay with the office. Every reply on WhatsApp comes with the same tags and permissions as the web, so nothing widens because the question came from a phone.
Centrus AI

in the 30 minutes

  1. 01We start with how your operation actually runs, on the desk and in the field.
  2. 02We take the ideas you've been reading about and show them running on a setup that matches yours.
  3. 03We pick out the admin that should run itself first.

See it on your own jobs.

Book 30 minutes and we'll show you the ideas from the blog running on your own job system, files and team.

30 minutes / UK team / No lock-inOr see pricing